CRF450R 2020 Roczen Replica- 0% APR
Honda’s mighty CRF450R is now equipped with Honda Selectable Torque Control, hand-in-hand with optimisation of the PGM-FI and HRC Launch Control mapping. The suspension features revised settings, and there are also updates to the rear brake and graphics.
-Yoshimura Exhaust -Plastics with Graphics applied -Seat cover -Accessory kit -Talon Wheels, red hubs and black rims(complete with tyres) -Talon Rear sprocket -RK Chain. All original parts are supplied.
Personal loan (VPL)
This is more like a simple loan. You decide on the model and put down a deposit the same way as with PCP. We calculate for you how much you want your fixed monthly payment to be, and the term. That means you know up front how much your Honda will cost each month until it’s paid off and you own the bike.
|CRF450R Roczenn Replica (VPL)|
|Amount of Credit||£4,296.00|
|24 Payments of||£179.00|
|Total Amount Payable||£9,499.00|
VPL Terms and Conditions: Subject to model and colour availability. Representative Example based on 2 years 0% VPL. Offers applicable at participating dealers and are at the promoter's absolute discretion. Indemnities may be required in certain circumstances. Finance is only available to persons aged 18 or over, subject to status. All figures are correct at time of publication but may be subject to change. Credit provided by Honda Finance Europe Plc. Cain Road, Bracknell RG12 1HL. Honda Finance Europe Plc is authorised and regulated by the Financial Conduct Authority, Financial Services Register number 312541.
The Honda CRF450R has been the motocrosser to beat since its introduction 2002. It has become a byword for balance and agility, and as such has always offered its rider – whether amateur enthusiast or pro-racer – total control and the chance to get the very best from their ability. Plus, of course it’s built with the durability and longevity that Honda has long been famed for.
And of course it’s a machine that has constantly evolved, with every upgrade, large or small, drawing on lessons fed back from Honda’s racing programmes throughout the world.
In 17YM, under a total redesign headlined ‘ABSOLUTE HOLESHOT!’ Europe’s favourite open-class MX machine was effectively a ground-up redesign, wielding a major power boost from a brand-new engine, plus increased grip and drive from a completely redesigned chassis. Addition of standard-fit electric start in 18YM completed the package.
For 19YM, an HRC-developed cylinder head upped peak power and torque considerably, and HRC launch control was added along with revised rigidity balance for the frame and swingarm, a new front brake caliper and adjustable-position Renthal Fatbars.
But the MX pack waits for nobody, and the best machines have to get better; for 20YM the CRF450R gets a new electronics package to make it faster over a lap, yet with even more control.
Alongside optimised PGM-FI engine maps and HRC Launch Control, for 20YM the CRF450R gains a new Honda Selectable Torque Control (HSTC) system, with 3 riding Modes to assist every rider, from beginner to pro, to manage rear wheel traction and gain drive.
The CRF450R’s frame and swingarm are unchanged but there are new compression damping settings for the Showa suspension. The rear brake gets a pad material revised for durability, and the battery box is re-sited.
New graphics for the radiator shrouds complete the update.
- Honda Selectable Torque Control (HSTC) with 3 riding modes (plus OFF)
- HRC Launch Control offers 3 start options
- Engine Mode Select Button (EMSB) features 3 maps to adjust output character
The HSTC fitted to the 20YM CRF450R works to minimise rear wheel spin (thus wasted forward drive) and maximise traction. It doesn’t use a wheel speed sensor, and critically maintains feel at the throttle while managing power; ignition timing is retarded and the PGM-FI controlled when the rate of change of rpm is detected to have gone over a set amount.
The three Modes differ in drive management level for different riding conditions:
In Mode 1 the system intervenes most lightly, and after the longest time - useful for reducing wheelspin and maintaining control in tight corners.
Mode 3 has the system intervene more quickly and strongly, and is therefore useful in more slippery, muddy conditions.
Mode 2 naturally offers a mid-point between 1 and 3 in terms of speed and strength of intervention.
Pressing and holding the HSTC button for 0.5s will cycle the system to the next mode, with a green LED indication – 1 blink for mode 1, 2 for mode 2 and 3 for mode 3 – to confirm selection.
The HSTC system can also be switched off completely. When the engine is turned on, the system uses the last-selected setting.
HRC Launch Control gives any rider the best option for a strong start and also has 3 modes to choose from:
Level 3 – 8,250rpm, muddy conditions/novice.
Level 2 – 8,500rpm, dry conditions/standard.
Level 1 – 9,500rpm, dry conditions/expert.
Activating HRC Launch Control is easy – to turn on, pull in the clutch and push the Start button on the right. The purple LED will blink once for Level 1 selection. Push the Start button again, for 0.5s or longer, and the LED will blink twice for Level 2. Repeat the process and the LED will blink 3 times, indicating that Level 3 has been chosen.
The Engine Mode Select Button (EMSB) alters the engine’s characteristics and three maps are available to suit riding conditions or rider preference:
Mode 1 – Standard.
Mode 2 – Smooth.
Mode 3 – Aggressive.
The LED also displays mode selected, but with a blue light.
The rider controls and displays – Launch Control indicator, EFI warning, EMSB mode button, and LED indicator – are sited on the left handlebar, with a separate unit for the new HSTC alongside.
- Showa fork and shock revised for increased low-speed compression damping under hard braking and acceleration
- Battery box re-sited to improve drive and airflow
- New rear brake pad material enhances power and longevity
The new CRF450R’s seventh-generation twin-spar aluminium frame was revised in detail for 19YM and is unchanged for 20YM; it maintains lateral and torsional stiffness for turning ability and traction, with increased yaw-angle stiffness for improved stability and tracking accuracy into, through and out of a corner.
The aluminium swingarm has a stiffer rigidity balance tuned to match the frame; the battery box is now sited 28.5mm lower to improve mass centralisation and drive. Rake and trail are set at 27.4°/116mm, with wheelbase of 1482mm; dry weight is 108kg, wet weight 112kg
Fully adjustable, the 49mm Showa USD coil spring fork is a version of the Showa ‘factory’ fork supplied to MX race teams in the Japanese championship. For 20YM – with the target of improved response in the hard-braking zone – the rod-end ‘B’ hole diameter has decreased from 2.4 to 1.6mm to increase the low-speed compression damping.
Likewise, the Showa rear shock’s main piston valving has been revised with greater low-speed compression damping (and less high-speed compression damping) to give improved control under hard acceleration.
The standard-fit, lightweight Renthal Fatbar flex for optimal comfort; the top yoke features two handlebar-holder locations for moving the handlebar rearward and forward by 26mm. When the holder is turned 180°, the handlebar can be moved an additional 10mm from the base position, resulting in four unique riding positions.
The twin-piston front brake caliper uses 30 and 27mm diameter pistons; along with low-expansion rate brake hose, it gives both a strong feel and improved staying power. It works on a 260mm wave-pattern disc. For 20YM a new rear brake pad material for the single-piston caliper increases power and durability in muddy conditions, and dispenses with the need of a cover guard for the 240mm wave-pattern disc.
Lightweight DID aluminium rims, with directly attached spoke pattern layout are finished in black; the front is a 21 x 1.6in, the rear a 19 x 2.15in. Fitted as standard equipment are Dunlop’s MX3SF and MX3S soft terrain tyres.
The CRF450R uses a lightweight 6.3L titanium fuel tank. The smooth external lines of the plastics help the rider move easily and the narrow frontal area and front mudguard directs an efficient funnel of air to the radiator. The radiator shrouds use durable film inset graphics – updated for 20YM – that cover a wide area with scratch-resistant style.
- Engine unchanged from 19YM HRC-led power and torque upgrade
- PGM-FI and HRC Launch Control mapping optimised
The 19YM boost in peak power and torque to the CRF450R’s 449.7 four-valve Unicam engine was significant – 1.8kW more power at 9,500rpm and 2Nm more torque at 7,500rpm – but not achieved at the expense of low-down performance from 3,000rpm-up, which was also improved.
And the work HRC performed on the cylinder head was extensive; combustion chamber squish was revised, as well as piston skirt profile, piston ring and conrod while both right and left engine cases were optimised for strength versus weight.
For 20YM the engine hardware is unchanged, with the focus of development on refinements and optimisation of the PGM-FI mapping, HRC Launch Control and addition of HSTC.
Bore and stroke is set at 96 x 62.1mm with compression ratio of 13.5:1. A gear position sensor allows the use of three specific ignition maps for 1st and 2nd, 3rdand 4th, and 5th and the PGM-FI injects fuel twice per cycle – the new air cleaner element base employed in 19YM more than doubled the surface area, with much greater flow as a result. The exhaust uses differing, larger diameter bores where it splits from the downpipe; 35mm right and 42mm diameter left and the left exhaust is also 89mm longer than the right.
Rock-solid reliability has always been a big factor in the CRF450R’s success and a 5-hole piston oil jet and dual 12mm drum scavenge pump manage lubrication.
|Engine Type||Liquid-cooled 4-stroke single cylinder Unicam|
|Bore x Stroke (mm)||96.0 x 62.1|
|Front Brake||Single 260mm disk|
|Rear Brake||Single 240mm disk|
|Front Suspension||Showa 49mm USD fork|
|Rear Suspension||Showa monoshock using Honda Pro-Link system|
|Front Wheel||Aluminium spoke|
|Rear Wheel||Aluminium spoke|
|Dimensions||2,183mm x 827mm x 1,260mm|
|Frame Type||Aluminium twin tube|
|Fuel Tank Capacity||6.3 litres|
STANDARD PARTS DELIVERY
For all parts & accessiories orders not purchased with a new machine, we offer a next working day service (if ordered Mon-Fri, stock permitting) Please note: Saturday & Sunday do not count as working days. Orders placed over the weekend will be processed on the following Monday (or Tuesday if a Bank Holiday). There will be a charge of £7.95 these orders will be dispatched out on 48 hour trackable Parcelforce service.
OFFSHORE UK & REPUBLIC OF IRELAND
If you're ordering to a offshore UK address or to the Republic of Ireland additional charges may apply. To receive a quote for these costs along with estimated delivery times, please contact us stating your address and the items you would like to order. You can still place your order through the website without receiving a quote but we will be in touch via email after the order has been placed to confirm delivery costs.
COLLECTION IN STORE
If you wish to pay us a visit you can collect the machine from our Harleston dealership at Lings Corner, Mendham Lane, Harleston, Norfolk IP20 9DW. Please speak to a member of our team to arrange a time and date for the collection.
MOTORCYCLE & SCOOTER BIKE DELIVERY
For all Motorcycle both On & Off Road and Scooters our own delivery vehicles are used with a trained member of the Lings team. They will do a careful product handover ensuring you fully understand the products controls, safety and accompanying paperwork. When purchasing your new machine from Lings you can arrange with our sales executives to organise the delivery to either your home or work address once your machine is ready. We deliver between Monday and Friday and our delivery drivers are fully trained to carry out a full hand over of your new machine, complete all relevant paperwork and collect your part exchange if necessary.
All New and Used Motorcycles & Scooters will be charged as per price guide below:
Zone 1 - £150
Zones 2, 3 & 4 - £100
Zones 5, & 6 - £75
Zone 7 - £50